Author: Jarm69

Catering, Event Planning, funfair events

When The Fair Comes To Town

30 March 2022

Have you ever wondered about when the fair comes town. It suddenly appear on your doorstep, almost overnight in many cases?

The funfair owner just gets up one day and decides to come and set up in the park across from your house right?

Erm, no, not exactly. Most events are planned months in advance. Indeed many fairs follow a regular date, in some cases stretching back hundreds of years. They tend to be the culmination of much planning, regular meetings, inspections and so on.

We were responsible for a few years for the fairground supplied in conjunction with the summer festival at Gainsborough. I had happened across the event whilst passing through the town one summer day. I contacted the organisers about attending with some attractions at the following years event. This was politely declined, and I tried again the following year with a similar result. Out of the blue I received an email asking if I would like to supply a couple of candy floss and Popcorn stalls. So cue a meeting with the relevant people, a deal was agreed and I was asked to supply all of my safety documentation.

A few weeks later, again out of the blue, the organisers asked if I would be interested in supplying a full range of attractions. This meant another meeting and plans being discussed. This proceeded quite well, until it was pointed out that the council couldn’t agree this with us directly, it had to be put out to tender to a minimum of 3 operators.

All 3 of us submitted tenders, and eventually we were notified that we had been successful.

More Meetings

After receiving the green light, we submitted details of the actual line up we proposed along with safety documentation. Then the council Health & Safety team contacted us asking for an onsite meeting. Cue another trip to Gainsborough to talk through their concerns.

Full steam ahead now, or so we thought. Until we were informed that part of the car park could not be occupied. It turns out that a local solicitors needed 24hr access to their building. So this meant a rewrite of the plan, and some modification to the line up we were bringing.

The day before the event, we had to be in Gainsborough to oversee the setting up and siting of rides. We were obviously there for the day of the event. Also the day after to ensure we had cleaned the site up and caused no damage. Oh, and the organisers wanted a debriefing meeting to discuss any issues that had come up.

So you can see, far from just rolling up, we had not only to deal with numerous organisations and individuals at the planning stage. We also had to travel to Gainsborough a number of times, for in the end what was a 1 day event.

When the fair comes to town, its the result of a lot of hard work, before the rides even turn up.

Equipment

New Equipment – Compact Generator

27 March 2022

When we were involved with the traditional funfair industry, we maintained a number of power generators to provide light and electricity for our equipment. When we gradually moved into the private hire market we sold them off as it was a condition of the hire service that the client provided power. We did keep a single small compact generator, more for sentimental reasons than anything else.

This was used very infrequently when a client couldn’t source power, and we would charge an small extra for taking it with us. Truth be told it was a pain, it took three or four men to man handle it into the back of a van.

Over the lockdown period our business started to change and we were being booked for larger outdoor catering events. More often we found the clients didn’t understand our power requirements, so it was decided to add some large power generators, along with refurbing our single remaining small unit.

We engaged Fairtech Fabrications to custom build a trailer for the small unit. The design brief was that the trailer needed to be large enough to take our bigger gensets. Additionally we wanted to find a way to make the smaller units easier to demount into the back of a van or trailer.

Form Follows Function

The end result was spot on. Whilst not winning any awards for good looks, it made the process of transferring the generator into a van so easy that the young ladies on the team could manage to do it without any fuss.

Compact Trailer For Demountable Gen Set
Compact Trailer For Demountable Gen Set

We also took the opportunity to clean and respray the engine and exhaust system. Along with coating the generator case in our new favourite product. Upol Raptor. A tough urethane coating designed to line the beds of pick up trucks. So far we have coated our freezers and jacket potato ovens with the product, and left them not only looking like new, but also able to take more of the knocks that our staff seem to dish out to them.

Our New Branding

We also took the opportunity to add our branding to the case, along with social media details.

10kva-Generator
10kva-Generator

Many thanks to Fairtech Fabrications for a job well done.

Resources:

Design and Construction Fairtech Fabrications

funfair events, Funfair Rides, Major Fairs

Tilburg Kermis, A Major Fair

23 March 2022

Another of our quick look at major fairs, a little different this time as it is in the Netherlands. Dating back to 1570, the Tilburg Kermis is the largest fair in the Benelux region, attracting over a million visitors annually which makes it big by any standard.

Playing host to upto 250 attractions spread over a 4.5km city centre site Tilburg is held around the third week in July. Like many fairs in the UK, it started as a market, being held to honour Tilburg’s patron saint. Unlike many UK based events though, the local community and businesses play an active part in the event. With local pubs and restaurants staging music events, large scale DJ sets and themed evenings. A stark contrast to the UK based scene, where many local businesses close for the duration of the fair.

Pink Monday

One of the most popular days of the fair, is Pink monday (Rose Maandag). Celebrating lgbt values, it brings gays and lesbians from across Europe, with many of the attractions sporting pink decor for the day. Attracting over 350,000 visitors this is a definite boost for the event. The slogan for the day is “Be Gay For A Day”

The event even has it’s own radio station. Kermis FM, offering a mix of information about the event, traffic data and kermis style music.

The final day of the Tilburg Kermis sees a massive procession towards the pius harbour. Culminating in a 15 minute firework display.

Resources: Kermis Tilburg Official Website

Manufacturer Profile

Frank Hrubetz & Company –  A Manufacturer Profile

20 March 2022

A resumption of our look at current and historic ride manufacturers in the funfair industry sees us looking at the now defunct company of Frank Hrubetz.

Dating from 1939 and at one time the second biggest ride builder in the U.S.A., the company finally closed its doors in 1992.

Frank Hrubetz originally worked at the Eyerly Aircraft Company, which was a well know manufacturer of aerial rides, based originally on a training device they designed for pilots. That company went on the develop the Loop a plane and roll a plane, two of its best selling designs which Hrubetz helped design.

In 1941 a partnership was formed with Earl 0. Bushnell to create Hrubetz and Bushnell. In addition to amusement rides they also manufactured heavily for the war effort during World War 2.

Hrubetz Rides

The main stay of the Hrubetz range were;

Paratrooper – Suspended seats with a canopy over the top to resemble parachutes.

Round Up – Also known as a meteorite in the UK, rides sit inside a cage which rotates at high speed sticking them the the mesh panels

Tip Top – A cross between a UK trabant and a waltzer ride, not really seen in the UK.

Fireball – Basically what we would call an octopus in the UK

Spitfire – Another oddball not seen over here. A weird cross between a paratrooper and a dive bomber.

The Hrubetz era came to and end, when Frank Hrubetz retires and sold his business to his son-in-law who renamed it Kilinski Manufacturing Company. This eventually became ManCo, then Datron Industries Inc.

In 2009 Battech Enterprises purchased the assets of Datron and continue to service some of the Hrubetz range in the present day.

Resources: Battech Enterprises