Category: Fun Story

Catering, Event Planning, Fun Story

Cannabis Candy Floss, A New High

16 February 2020

Long one of our most popular desserts. A Californian (where else) company is taking it to new heights with cannabis candy floss.

Candy floss is now available from them laced with THC, or to give it the correct name Tetrahydrocannabinol .

For those who don’t know, this just happens to be the ‘active’ ingredient in cannabis. The bit that gives you the high.

The new floss, comes with a full 100mg of active ingredient present. Enough to give a new meaning to the phrase party snack.

Now, we aren’t going to argue the morality or otherwise of such a product. TBH we very much doubt its going to appear in the UK.

A few years ago the medical establishment was experimenting with using candy floss to deliver drugs to kids. Laughing at the time we wondered how long it would be before someone launched floss with recreational drugs.

Perhaps our new range of alcohol flavoured candy floss might be more palatable. Especially considering they are flavoured but don’t actually contain any active alcohol. We are launching with Brandy, Whisky and Gin, but if the reception is good enough will be expanding it over the summer season.

It makes you wonder though what cannabis can be added to next, there is likely to be a steady stream of food and drink coming this way.

Sadly we aren’t yet allowed to offer cannabis floss, but if you would like to hire a candy floss cart then we can help.

Catering, Fun Story, General

Britain the nation of hot fresh Popcorn Lovers!

2 February 2020

Britain the nation of hot fresh popcorn Lovers! In fact most say it’s the only treat worthy to indulge in at the cinemas along with a tango ice blast slush. I mean what’s better than hot fresh popcorn…salted or sweet or if your adventurous maybe even toffee popcorn washed down with a mixed slushy.

Subsequently however many hot fresh popcorn lovers will also be able to tell you how annoying it is to get popcorn pieces stuck in your teeth and just how stubborn the curved shell can be to remove from the residence they seem to take upon your mouth. In fact I think it’s fair to say some popcorn shells try to take up squatters rights.

One man who lives to tell the harrowing tale of having a hot fresh popcorn piece stuck in his tooth is 41 year old Adam Martin from Cornwall. Adam a firefighter and farther of three managed to get a piece of popcorn stuck in his teeth after watching a film one evening in September with his wife and kids. Martin’s used a number of tools for around three or four days to try and dislodge the popcorn including items such as a tooth pick, pen lid, piece of wire and even a metal nail. After dislodging the popcorn Adam carried on his day to day activities forgetting all about the popcorn fiasco.

Less than a week later…

Less than a week later Martin began to suffer from the typical symptoms of flue, fatigue, constant headaches, body shivers and sweats, however when these symptoms had yet to subside months later he took a trip to the doctors who diagnosed him with a mild heart murmur and sent him home. When he continued to feel unwell he went to Cornwall Royal Hospital where he was there diagnosed with Endocarditis which is an infection of the endocardium which affects the lining of the interior chambers of the heart. According to specialists the infection is brought on when bacteria enters the bloodstream especially from the mouth and skin

Adam himself stated that he felt there was something seriously wrong, and that he was sleeping all the time and had aches and pains in his legs. He was admitted the same day to the hospital for more tests and to see the extent of how serious this infection was. The tests and scans showed that his heart was severely damaged and he had to undergo an emergency 7 hour open heart surgery to repair the mitral valve and replace the aortic valve.

Moral Of The Hot Fresh Popcorn Story

If Adam had gone to the dentist in the first place to remove the hot fresh popcorn piece safely then this near death experience may never have happened. Even though it wasn’t proved that the popcorn led to all that had gone wrong Adam stated that was the only thing he could think of to cause an infection. The infection could also have been handled sooner if he had of got antibiotics sooner.

Don’t let this story put you off enjoying the hot fresh popcorn at the cinema! This is such a trivial situation that lead to an unfortunate but rare situation. So guys the moral of the story is if you get popcorn stuck in your teeth go to see a professional and don’t use any old object laying around.

Fun Story, Photo Booths

Classic Mini Restoration

30 January 2020

Continuing our restoration we have just finished the front subframe. That’s the classic Mini version of a chassis, they have one front and one back. The front one here carries the engine, front braking system and front wheels.

This one was a bit worse for wear than the rear frame. Necessitating replacing the entire metal structure with a new one. We took the opportunity whilst doing this to replace and upgrade the braking system, drive hubs and brake pipes.

Classic Mini Front Subframe

We replaced the entire front subframe to give us a firm base to start from.

Badly Rusted Towers
More Rust

We also made the decision to go back to solid mounts on the front subframe and semi solid on the tower mounts. Although it is meant to slightly worsen the ride quality, it is supposed to vastly improve the handling, and lets face it, the best part of a classic Mini is the ability to throw it around corners, fast.

Our Newly Refurbished Frame

We also decided that we were going to replace the brake discs with some uprated versions. After much research settled on some Red Calipers from KAD. To be honest this was as much for the looks as anything else. They are absolutely stunning in anodized red, we also added vented and grooved discs, and lightweight alloy drive hubs for a little weight saving.

Braking System

KAD Brake Calipers
KAD Brake Calipers rear view

We also added the obligatory Goodridge braided brake pipes. Fully adjustable tie bars and bottom control arms to allow the suspension to be set up to perfection.

Specialist Components LIghtweight Tower Bolts

The late great Colin Chapman once said, give a car more power and its faster on the straights, make a car lighter and its faster everywhere. To this aim, we swapped the tower bolts for lightweight alloy alternatives. Another product from Specialist Components, a little weight saving along with stunning looks.

DSN Retrosport Solid Front Mounts

The other front mounts.
Stainless Top Arm Brackets

Its meant to be a classic mini restoration, but the aim is to use modern components to make it better than original.

Catering, Fun Story, General

Edible Coffee Cups…Whatever Next?

25 January 2020

Edible coffee cups are a new green innovation being trailed by Air New Zealand; a leading national airline. The Cups made from vanilla flavoured biscotti are made by a local New Zealand company Twiice. When first hearing about this trial my first thought was no one wants a leaky coffee cup! Imagine sat minding your own business and before you could finish your coffee the biscotti gives way and hot frothy coffee leaks all over your lap staining your clothes and making you uncomfortable for the rest of your flight! However after further research I have been informed these cups are apparently ‘leak proof’.

edible coffee cup
Air New Zealand’s new edible coffee cup.

Numbers Don’t Lie

Statistics show that 99.75% of coffee cups are not recycled, the UK alone are estimated to throw away 2.5 billion coffee cups away each year and only 0.25% are recycled. Air New Zealand are responsible for serving more than 8 million cups of coffee a year and said that they want to reduce the amount of waste that the company sends to landfills. This is just a small step on a large scale global issue. Many people have said that a change in cups is not a big enough environmental commitment for a company that size to make however in a statement released by Air New Zealand said that these new cups was being trailed both on the ground and in the air and was a small step into finding new innovative ways to meet sustainability challenges.

The cups have been a big hit so far with customers and they have also used the cups to serve desserts in rather than plastic dessert bowls. The cups are said to have a really good impact on the environment especially if it catches on to other companies around the world. The switch is from compostable cups made of paper and corn that is used in most of Air New Zealand’s lounges and aeroplanes, these cups are environmentally friendly however still fill up the landfill sites and take years to decompose. The plant based bio degradable cups have still been made available for consumers that may have a food allergy as the cups may contain traces of nuts, dairy and eggs.

Edible Coffee Cups Saving Reputations

Air companies and travel companies come under a lot of scrutiny when it comes to the environment. Flights produce a lot of greenhouse gases from burning fuel which contributes largely to the world’s global warning issue when the fuel is released into the atmosphere.

All companies no matter how big or small can take steps to help reduce their carbon footprint… if these new edible coffee cups literally take off and become popular than we may have to look into them for our coffee cart events.

Event Planning, Fun Story, Photo Booths

Beginning Jaspers Restoration

22 January 2020

The engine out of our mini is in bits, spread around a number of specialist engine builders (MED and Southam Mini Centre), to be tuned up and the power output cranked up a bit. Although Jaspers restoration was meant to be a quick tidy up, its ended up becoming a complete makeover.

The bodyshell is in the blasters to be stripped of paint. So we have turned our attention to the rear subframe, the first of the parts we are refurbing in house.

It was a bit grotty to start with, but mainly surface rust so nothing to major to put right.

The swing arms were blasted, coated with cold galvanizing spray then topcoated with a Rustbusters product. The bushes and bearings were changed, new pins fitted, Goodrich brake lines, alloy brake drums, and specialist components rear hub assemblies fitted, along with DSN retrosport alloy brake plates.

Things like the handbrake quadrants are really for looks rather than performance, but hey if you are going to do it, might as well look the part.

To finish the subframes we fitted alloy trunnions, adjustable swing arm brackets, and seam sealed the subframe to prevent water ingress. Once the subframes are fitted we have some Bilt Humber anti rust wax, but we don’t want to coat the parts yet as it will make a mess fitting them.